The first thing we need to do is design the layout of the graphical login screen before we start doing anything. Planning is very important in order to produce good software. The following is a sample layout design I made to show you how I imagine the login screen will look. Just a simple line drawing like this is sufficient as long as it conveys the message clearly:

Now that we know exactly how the login screen should look, let's go back to Qt Designer again.

We will be placing the widgets at the top panel first, then the logo and the login form below it.

Select the main window and change its width and height from 400 and 300 to 800 and 600 respectively because we'll need a bigger space in which to place all the widgets in a moment.

Click and drag a label under the Display Widgets category from the widget box to the form editor.

Change the objectName property of the label to currentDateTime and change its Text property to the current date and time just for display purposes, such as Monday, 25-10-2015 3:14 PM.

Click and drag a push button under the Buttons category to the form editor. Repeat this process one more time because we have two buttons on the top panel. Rename the two buttons restartButton and shutdownButton respectively.

Next, select the main window and click the small icon button on the form toolbar that says Lay Out Vertically when you mouse-over it. Now you will see the widgets are being automatically arranged on the main window, but it's not exactly what we want yet.

Click and drag a horizontal layout widget under the Layouts category to the main window.

Click and drag the two push buttons and the text label into the horizontal layout. Now you will see the three widgets being arranged in a horizontal row, but vertically they are located in the middle of the screen. The horizontal arrangement is almost correct, but the vertical position is totally off.

Click and drag a vertical spacer from the Spacers category and place it below the horizontal layout we created previously (below the red rectangular outline). Now you will see all the widgets are being pushed to the top by the spacer.

Now, place a horizontal spacer between the text label and the two buttons to keep them apart. This will make the text label always stick to the left and the buttons align to the right.

Set both the Horizontal Policy and Vertical Policy properties of the two buttons to Fixed and set the minimumSize property to 55x55. Then, set the text property of the buttons to empty as we will be using icons instead of text. We will learn how to place an icon in the button widgets in the following section.

Now your UI should look similar to this:

Add a horizontal layout between the top panel and the vertical spacer to serve as a container for the logo.

After adding the horizontal layout, you will find the layout is way too thin in height to be able to add any widgets to it. This is because the layout is empty and it's being pushed by the vertical spacer below it into zero height. To solve this problem, we can set its vertical margin (either layoutTopMargin or layoutBottomMargin) to be temporarily bigger until a widget is added to the layout.

Next, add a label to the horizontal layout that you just created and rename it logo. We will learn more about how to insert an image into the label to use it as a logo in the next section. For now, just empty out the text property and set both its Horizontal Policy and Vertical Policy properties to Fixed. Then, set the minimumSize property to 150x150.

Set the vertical margin of the layout back to zero if you haven't done so.

The logo now looks invisible, so we will just place a temporary style sheet to make it visible until we add an image to it in the next section. The style sheet is really simple:

border: 1px solid;

Now your UI should look similar to this:

Add a horizontal layout between the logo's layout and the vertical spacer. Just as we did previously, set the layoutTopMargin property to a bigger number (that is, 100) so that you can add a widget to it more easily.

After that, add a vertical layout inside the horizontal layout you just created. This layout will be used as a container for the login form. Set its layoutTopMargin to a number lower than that of the horizontal layout (that is, 20) so that we can place widgets in it.

Next, right click the vertical layout you just created and choose Morph into -> QWidget. The vertical layout is now being converted into an empty widget. This step is essential because we will be adjusting the width and height of the container for the login form. A layout widget does not contain any properties for width and height, but only margins, due to the fact that a layout will expand toward the empty space surrounding it, which does make sense, considering that it does not have any size properties. After you have converted the layout to a QWidget object, it will automatically inherit all the properties from the widget class, and so we are now able to adjust its size to suit our needs.

Rename the QWidget object, which we just converted from the layout, to loginForm and change both its Horizontal Policy and Vertical Policy properties to Fixed. Then, set the minimumSize to 350x200.

Since we already placed the loginForm widget inside the horizontal layout, we can now set its layoutTopMargin property back to zero.

Add the same style sheet as the logo to the loginForm widget to make it visible temporarily, except this time we need to add an ID selector in front so that it will only apply the style to loginForm and not its children widgets:

#loginForm { border: 1px solid; }

Now your UI should look something like this:

Place two horizontal layouts into the login form container. We need two layouts as one for the username field and another for the password field.

Add a label and a line edit to each of the layouts you just added. Change the text property of the upper label to Username: and the one below as Password:. Then, rename the two line edits as username and password respectively.

Add a push button below the password layout and change its text property to Login. After that, rename it as loginButton.

You can add a vertical spacer between the password layout and the login button to distance them slightly. After the vertical spacer has been placed, change its sizeType property to Fixed and change the Height to 5.

Now, select the loginForm container and set all its margins to 35. This is to make the login form look better by adding some space to all its sides.

You can also set the Height property of the username, password, and loginButton widgets to 25 so that they don't look so cramped.

Now your UI should look something like this:

Add another vertical spacer between the top panel and the logo's layout. This way it will counter the spacer at the bottom which balances out the alignment.

If you think that the logo is sticking too close to the login form, you can also add a vertical spacer between the logo's layout and the login form's layout. Set its sizeType property to Fixed and the Height property to 10.

Right click the top panel's layout and choose Morph into -> QWidget. Then, rename it topPanel. The reason why the layout has to be converted into QWidget is that, we cannot apply style sheets to a layout, as it doesn't have any properties other than margins.

Currently you can see there is a little bit of margin around the edges of the main window – we don't want that. To remove the margins, select the centralWidget object from the object inspector window, which is right under the MainWindow panel, and set all the margin values to zero.

At this point, you can run the project by clicking the Run button (with the green arrow icon) to see what your program looks like now. If everything went well, you should see something like this:

After we've done the layout, it's time for us to add some fanciness to the UI using style sheets! Since all the important widgets have been given an object name, it's easier for us to apply the style sheets to it from the main window, since we will only write the style sheets to the main window and let them inherit down the hierarchy tree.

Right click on MainWindow from the object inspector window and choose Change Stylesheet.

Add the following code to the style sheet:

#centralWidget { background: rgba(32, 80, 96, 100); }

Now you will see that the background of the main window changes its color. We will learn how to use an image for the background in the next section, so the color is just temporary.

In Qt, if you want to apply styles to the main window itself, you must apply it to its central widget instead of the main window itself because the window is just a container.

Then, we will add a nice gradient color to the top panel:

#topPanel { background-color: qlineargradient(spread:reflect, x1:0.5, y1:0, x2:0, y2:0, stop:0 rgba(91, 204, 233, 100), stop:1 rgba(32, 80, 96, 100)); }

After that, we will apply black color to the login form and make it look semi-transparent. After that, we will also make the corners of the login form container slightly rounded by setting the border-radius property:

#loginForm
{
  background: rgba(0, 0, 0, 80);
  border-radius: 8px;
}

After we're done applying styles to the specific widgets, we will apply styles to the general types of widgets instead:

QLabel { color: white; }
QLineEdit { border-radius: 3px; }

The preceding style sheets will change all the labels' texts to a white color, which includes the text on the widgets as well because, internally, Qt uses the same type of label on the widgets that have text on it. Also, we made the corners of the line edit widgets slightly rounded.

Next, we will apply style sheets to all the push buttons on our UI:

QPushButton
{
  color: white;
  background-color: #27a9e3;
  border-width: 0px;
  border-radius: 3px;
}

The preceding style sheet changes the text of all the buttons to a white color, then sets its background color to blue, and makes its corners slightly rounded as well.

To push things even further, we will change the color of the push buttons when we mouse-over it, using the keyword hover:

QPushButton:hover { background-color: #66c011; }

The preceding style sheet will change the background color of the push buttons to green when we mouse-over them. We will talk more about this in the following section.

You can further adjust the size and margins of the widgets to make them look even better. Remember to remove the border line of the login form by removing the style sheet that we applied directly to it earlier.

Now your login screen should look something like this: