The paper SAS302-2014, Introduction to SAS^® Studio, Michael A. Monaco, Marie Dexter, Jennifer Tamburro, SAS Institute Inc., Cary, NC, http://support.sas.com/resources/papers/proceedings14/SAS302-2014.pdf, describes the server files and folders as follows: 

The Folders section of the navigation pane enables you to access your folders, create folder shortcuts, download and upload files, and create new SAS programs. You can expand and collapse folders, and you can open items in the folders, such as a SAS program or table, by double-clicking them or by using a drag-and-drop operation to move them to the work area.

The Folders section of the navigation pane references files that are stored on the same machine as the SAS server. These files can be downloaded to your workstation. Local files on your workstation must be uploaded to the server in order to be used with SAS Studio.

Similarly, the paper SAS302-2014 Introduction to SAS^® Studio, Michael A. Monaco, Marie Dexter, Jennifer Tamburro, SAS Institute Inc., Cary, NC, http://support.sas.com/resources/papers/proceedings14/SAS302-2014.pdf describes the tasks and utilities as follows: 

The Tasks section of the navigation pane enables you to access tasks in SAS Studio. Tasks are based on SAS procedures and enable you to generate SAS code and formatted results, based on the entry of user-supplied inputs and parameter values. SAS Studio is shipped with several predefined tasks that you can run. You can also edit a copy of a predefined task, and you can create your own new tasks.

As stated by the paper SAS302-2014 Introduction to SAS^® Studio, Michael A. Monaco, Marie Dexter, Jennifer Tamburro, SAS Institute Inc., Cary, NC (http://support.sas.com/resources/papers/proceedings14/SAS302-2014.pdf).

The Snippets section of the navigation pane enables you to access your code snippets, which are samples of commonly used SAS code that you can insert into your SAS program. SAS Studio is shipped with several predefined code snippets that you can use. You can also save copies of these snippets and edit them to create your own custom snippets.

The paper SAS302-2014 Introduction to SAS^® Studio, Michael A. Monaco, Marie Dexter, Jennifer Tamburro, SAS Institute Inc., Cary, NC, http://support.sas.com/resources/papers/proceedings14/SAS302-2014.pdf also states this: 

The Libraries section of the navigation pane enables you to access all of your SAS table libraries and their contents. You can expand a table and view the columns in that table. The icon in front of the column name indicates the data type of the column. In addition to viewing the column names, you can use a drag-and-drop operation to move the columns from the tree directly into your SAS code.

Libraries in SAS are pointers to datasets (or tables). Within SAS, they will all look the same regardless of whether they are SAS datasets or data stored in a database or other data storage systems, such as Hadoop or SAP HANA. Datasets are referenced in SAS code by library-name.dataset-name. For example, open the Libraries section and expand My Libraries to see the following:

Figure 1.9: Default SAS libraries in the SAS Studio Libraries section

SAS libraries can either be permanent, which means the tables stored in them are saved as permanent tables within whatever type of data storage that library is associated with; or they can be temporary, such as WEBWORK and WORK, which means the data tables stored in these libraries will be deleted when your SAS session ends. SAS uses the WORK library to store intermediate tables that SAS may need to create in the process of executing SAS code. Expand SASHELP and you will see a lot of default data tables that are shipped with SAS. We will make use of some of these tables in the exercises associated with this book. Right-click on the SASHELP library and select Properties. In this case, you will see a list of physical path locations or directories in which all the data tables displayed under SASHELP are stored. In this case, SASHELP is a concatenated list of several physical directories. In most cases, SAS libraries either point to a single physical directory or a particular schema within a database system. The directories or database system is where the physical data tables are actually stored.   

The paper SAS302-2014 Introduction to SAS^® Studio, Michael A. Monaco, Marie Dexter, Jennifer Tamburro, SAS Institute Inc., Cary, NC, http://support.sas.com/resources/papers/proceedings14/SAS302-2014.pdf has described file shortcuts as follows:

File shortcuts, also known as SAS File References, enable you to quickly access files. You can create a file shortcut to a file on your SAS server or via a URL.

Are you ready to begin building your SAS programming skills? As has been a tradition in learning any new programming language, we will write some SAS code that will print Hello World. This is quite easy to do, and all you need to do to start is to get into your SAS Studio, and, using the right-hand pane, make sure you have the CODE section of your Program1 tab highlighted and then type the following SAS data step code:

/* This is one way to add comments to your code */
data _null_;
   text="Hello World";
   put text;
run;
* here is another way to add a comment or to comment out code;

Notice that the code window automatically changes the color of various parts of the code to make it easier for you to identify specific parts. For example, both the comments are green, SAS key or reserved words are bold and dark blue, SAS statements such as the put statement are a lighter blue, variable names are black, and character values are purple. Every executable line of SAS code ends with a semi-colon and a data step starts with the keyword data and ends with the run statement. Before submitting or running this code, there a few other parts of the code that should be explained. Typically, the data keyword will be followed with the name of the data table you want the code to create, and it takes the form libraryname.tablename. For example, the statement data work.temp; will instruct SAS to create a data table in the temporary SAS library named WORK and name that table temp. In this case,  _null_ is a special reserved word that instructs SAS to execute the data step code, but doesn't save the results into any data table.

Now, submit the code by either clicking on the running man icon on the CODE toolbar or by pressing the F3 function key. You should see a window pop-up stating Running, and then be presented with this in SAS Studio:

Figure 1.10: Log after submitting your Hello World data step program

As long as there was not a syntax error in your code, there should only be some blue-colored notes, the code you submitted, and the text Hello World printed out in the LOG. Congratulations on having successfully written and submitted a SAS program! Notice that similar to the color coding used in the CODE tab, the LOG tab uses color to help debug or make it easier to read how the code executed. Errors will show up in red, warnings in green, notes in blue, and code will be in black. In addition, a nice feature of the LOG tab in SAS Studio is that it will provide you with a linked index listing of any of the errors, warnings, or notes that occurred so a user can easily jump to that line in the log to help review and resolve them quickly. Click on the RESULTS tab and note that nothing showed up here. Why didn't the Hello World result show in the RESULTS tab? The RESULTS tab is used to show results to an end user that come from SAS PROCs, not from the put statement that was used in the data step program.  

Move back into your CODE tab and use the double Xx  in the CODE tool bar to clear all code. Now type the following code:

proc print data=SASHELP.CARS (obs=10);
run;

proc print will print out all the rows of the data table you specify in the data part of the statement. In this case, one of many dataset options, obs is being used to instruct the proc to only perform its functions on the first 10 observations. Submit this code and the results should appear in the RESULTS tab:

Figure 1.11: Results from proc print

Congratulations on executing a SAS PROC in a SAS program! Trust me, you will learn to appreciate and maybe even love PROCs, as they save a programmer a lot of time. Think for a moment about the small amount of code that was submitted, which printed out a subset of rows from a data table. How much code would have had to be written in any other language to achieve the same result? Yes, SQL could be used, but I doubt it could be done using less code.

Furthermore, the code window provides syntax completion for the programmer so that as you type, the programmer will be prompted for what SAS expects are valid parts of the code being written. This feature is quite useful, especially for new programmers or for experienced programmers starting to use a new PROC they may not be familiar with yet, because it gives a list of options that can be used with that particular PROC. As a programmer gains more experience, they may turn this feature off, which can easily be done by selecting the More application options icon to the left of the Help question mark icon in the top right-hand corner of SAS Studio and selecting Preferences:

 Figure 1.12: Code tab (Editor) preferences window

If the programmer wants to disable the code completion feature with the CODE tab, simply uncheck the Enable autocomplete (Ctrl+spacebar or Command+spacebar) box. To toggle this feature on and off while in the CODE tab writing code, a programmer can use either of these shortcut key combinations to accomplish this: Ctrl+spacebar or Command+spacebar.

Move back into the Program1 section and the CODE tab. Let's verify that programs and data tables can be saved within the SAS environment. SASUSER is a permanent SAS library that is created automatically for each user, and in this virtual SAS server environment, this library should have been allocated to the shared folder that was set up as C:\SASUniversityEdition\myfolders\sasuser.v94. Select the Save As icon from the CODE toolbar, expand My Folders, select sasuser.v94, and change the program name to Proc_print:

Figure 1.13: Save as window

Select Save and then verify that it automatically showed up under the Server Files and Folders section of the left-hand pane of SAS Studio and as a physical file in the C:\SASUniversityEdition\myfolders\sasuser.v94 directory:

Figure 1.14: Proc_print.sas stored as a physical file on a PC

Move back into SAS Studio, and on the left-hand pane under the Server Files and Folders select the New icon and then select SAS Program(F4). SAS Studio allows a user to have multiple programs open at the same time and each program will have their own CODE, LOG, and RESULTS tabs:

Figure 1.15: SAS Studio showing two program sections

Now, copy some data from the SASHELP library into the WORK library using both data step code and a PROC. Type in the following code into the CODE tab of the new Program 1 section:

/* Data set code to copy a data table */
data WORK.MYCARS;
   set SASHELP.MYCARS;
run;

/* PROC code to copy a data table */
proc copy out=WORK in=SASHELP;
   SELECT CLASS;
run;

Submit this code and notice that SAS Studio adds an additional tab to your Program 1 section labeled OUTPUT DATA:

Figure 1.16: SAS Studio OUTPUT DATA tab

The SAS Studio user can toggle between both of the datasets created by this code with the Table drop-down list. This tab also shows the columns or variables within the tables and shows the user what the rows look like within the datasets. 

There is a special SAS program file called autoexec.sas. This file allows an individual user or a server administrator to put any type of SAS executable statement in it, and whenever the individual starts a SAS session or, for a server, whenever the server is started, then the code in this file executes automatically. On a server, this makes it easy to set up consistent libraries that are named the same for multiple users, which saves time and resources because there is only one connection/pointer needed for a particular data source, instead of multiple libraries from multiple users making multiple connections to a single data source.

Likewise, at the individual user level, this empowers the user to set up libraries, create data, create user-defined formats, and/or create SAS macros that they themselves use all the time. SAS Studio provides the user with access to their own autoexec file through the More application options icon located in the top right-hand corner to the left of the Help question mark icon. Select the icon for More application options and select Edit Autoexec File:

Figure 1.17: SAS Studio autoexec

There are two tabs Autoexec.sas and Log. The Autoexec.sas tab is simply a special code pane, and the Log allows you to debug any code that is put in the Autoexec.sas pane and Run.

In this book, the reader will primarily use the SAS Programmer perspective; however, SAS Studio also provides a Visual Programmer perspective, which is designed for users who would prefer to work with process flows in a project-based environment. In the upper right-hand corner of SAS Studio, right-click on SAS Programmer and then switch to the Visual Programmer perspective:

Figure 1.18: Switching between SAS and Visual Programmer persceptives

Notice how the right-hand side of SAS Studio changes from a Program 1 section with CODE, LOG, and RESULTS tabs to a Process Flow 1 section with FLOW, RESULTS, and PROPERTIES tabs:

Figure 1.19: SAS Studio process flow section

The reader can now build a process flow using drag and drop functionality. On the left-hand side of SAS Studio, select/expand Libraries and select/expand SASHELP, which will provide the user with a list of default datasets that come with SAS:

Figure 1.20: SASHELP library

Left-click and hold down on the AIR dataset and drag this over to the Process Flow 1 section and drop it:

Figure 1.21: The AIR dataset graphically represented within a process flow

To continue building a simple process flow, the user should now select/expand Tasks and Utilities on the left-hand side of SAS Studio and select/expand Tasks. As the user did for dragging and dropping the SASHELP. AIR dataset onto the process flow, drag and drop the List Table Attributes task to the right of the AIR table and then connect the two icons by left-clicking and holding on the control point, the little square, on the right side of the AIR icon, and drag the arrow over to connect it to the control point on the left side of the List Table Attributes icon:

Figure 1.22: Process flow with two icons connected

The Run icon of the Process Flow 1 section should have ungrayed now that a table has been connected to a task; however, you will notice the task has a red half-filled circle icon in the lower right-hand corner. The red circle means that the task's properties have not yet been generated or manually added. Select the Run  icon and the user should see the following popup window:

Figure 1.23: Process flow popup information window

To resolve this situation, select Close and then right-click the List Table Attributes icon and select Open. Once the user does this, SAS Studio generates the necessary code for this task and the reader should see the following window:

Figure 1.24: SAS Studio Auto-Generated Task Code

Select Process Flow 1 in the upper left-corner to return to the process flow and now select Run. A popup window that says Running will appear while the process flow executes. Select the RESULTS tab, and it will provide the status and time of each executable step in the flow:

Figure 1.25: Process Flow Results

Click back on the Process tab and right-click on the List Table Attributes icon and select Open:

Figure 1.26: List Task Attributes results

When the List Table Attributes task opens this time, instead of the CODE tab being active and seeing the SAS Studio auto-generated code, the RESULTS tab is active and displays the output from the code that ran successfully when the user ran the process flow. Switch SAS Studio back to the SAS Programmer perspective using the drop down list in the upper right-hand corner.

Since SAS is an analytic platform with many modules and solutions, let's see which pieces of the SAS environment are included in the SAS^® University Edition. Return to the Program 1 section and clear all the code using the Xx icon on the CODE tab toolbar. Type the following code in the CODE tab:

/* This lists the SAS foundation products that are installed on your system */ 
/* along with their version numbers.                                        */
proc product_status;
run;

/* This lists the SAS products that have been licensed and the date through */
/* which the licensed software is valid.                                    */ 
proc setinit;
run;  

Click and highlight only the proc product_status; run; part of the code and submit this by selecting the running man icon from the CODE tab toolbar.  

1.27: PROC product_status results for SAS^® University Edition

As the results show, the SAS^® University Edition contains custom versions of BASE SAS, SAS/STAT^® software, SAS/ETS^® software, SAS/IML^® software, High Performance Suite, and SAS/ACCESS^® Interface to PC files based on the SAS 9.4 M4 (Maintenance 4) release. Feel free to submit the older version proc setinit; in order to compare the output from the two different PROCs.  

Please take some time to review the SAS product documentation by selecting the question mark icon in the upper right-hand corner of SAS Studio. This will take the user to an index listing of documentation for all SAS products and will help the user to understand the broad and deep power that the SAS language brings to solving business issues. Simply by looking at the listing of all the PROCs included in BASE SAS, a programmer should understand why this particular book will not be providing you a complete understanding of all the PROCs in any one of the included SAS products.

However, this book will provide the reader with a thorough understanding of SAS, and how once a programmer learns some of the SAS language, how easy it is to leverage the knowledge gained here in order to continue to learn other parts of the SAS system over a programmer's entire career.

At a high level, here are what the different pieces of the SAS^® University Edition do—BASE SAS provides the bulk of data access, management, and preparation capabilities; SAS/STAT adds powerful descriptive and predictive analytics; SAS/ETS adds powerful forecasting capabilities; and SAS/IML adds matrix algebra and some optimization capabilities.

The SAS language originally started out as a bunch of tools, such as BASE, SAS/STAT, SAS/GRAPH, and SAS/ETS. These tools are what many today refer to as foundation (SAS) tools. Today, the simplest bundle of SAS^® software is known as SAS Analytics Pro and contains BASE, SAS/STAT, and SAS/GRAPH. In the mid-1990s, SAS developed a metadata-based platform, at the heart of which lies what is called SAS Integration Technologies, which evolved into the SAS Intelligence Platform. It was on top of this metadata layer and foundation tools that several horizontal SAS solutions were developed. Chief among these horizontal solutions are SAS Enterprise Miner^TM, the gold standard in providing an easy-to-use intuitive descriptive and predictive analytics GUI, and SAS Forecast Server, which provides an easy-to-use intuitive GUI for forecasting.  

The reason these are described these as horizontal solutions is because they are used to solve their respective types of business issues across all industries. Around the year 2000, SAS started bringing to the market, at their customer's requests, what are referred to as vertical solutions. These solutions are built from a combination of the horizontal metadata-based solutions and the foundation tools. They are designed purposefully to address a specific business issue either in a certain department, such as marketing, or for a specific industry problem. Some examples of these types of vertical solutions are load forecasting in utilities and anti-money laundering in financial services. Typically, these solutions also contain intellectual property in the form of a data model that aligns well with the data needed to solve the business issue at hand.

As the age-old saying goes, a picture is worth a thousand words, so here is an image of the three levels that were just described:

Figure 1.28: Evolution from tools to solutions

There are several aspects of data storage within the SAS environment and how the data storage helps to optimize how the overall system processes the data. 

One very important feature of the SAS language and its data storage is the concept of the format and informat. Formats tell you how to display stored data, and informats tell you how to read them. While some programming languages provide limited formatting capabilities, SAS provides a robust and user-expandable system of formats. As a result, formats and informats play a far more valuable role within SAS than they do in other languages.

Within SAS, there are two types of formats/informats: those that are supplied by SAS called system formats, and those that allow a SAS Programmer to extend the system called user-defined formats. Because formats provide another method for storing and using information, they are important to understand and use as a SAS Programmer. When we start discussing SAS in-database technology in Chapter 7, SAS^® Software Engineers the Processing Environment for You of this book, formats are a piece of SAS that you can push down into a massively parallel processing (MPP) data storage system such as an MPP database or Hadoop, and use them to extend the functionality of those systems just like they do within the SAS environment.

SAS date and time variables are stored in SAS as numeric data. Storing dates and times in this numeric form makes it easier to deal with interval calculations, but can present a problem when using the raw data in a report or when printing it out. Dates are expressed as integers and indicate the number of days since January 1, 1960. Time variables are represented as the number of seconds since midnight. Variables that contain both date and time parts and are referred to as datetime variables. Datetime variables indicate the number of seconds since midnight on January 1, 1960. This is why it is important to understand and use the date and time related formats and informats so the data is represented in a familiar looking format that is easy for users to understand. Once a programmer understands how dates and times are stored in SAS and how to make use of all the date- and time-related formats/informats and functions, they usually appreciate the power and ease with which one can use SAS to read in dates and times from any source system, and write them out in any format required by a target system or end user report.

A programmer can use this knowledge to save physical storage space by storing a date, time, or datetime variable in one variable instead of storing the same date in multiple variables, simply to represent different ways to display that date. With one variable and formats, the programmer will be able to render reports on the fly for end users around the globe, who are used to seeing dates in the format most used in their countries.