Book Image

WildFly Configuration, Deployment, and Administration

By : Francesco Marchioni, Christopher Adam M Ritchie
Book Image

WildFly Configuration, Deployment, and Administration

By: Francesco Marchioni, Christopher Adam M Ritchie

Overview of this book

Table of Contents (19 chapters)
WildFly Configuration, Deployment, and Administration Second Edition
Credits
About the Author
About the Reviewers
www.PacktPub.com
Preface
Index

Creating our very own domain configuration


We will now provide a detailed example of a domain configuration. In this example, we include two separate host controller configurations, each one with a list of three nodes. You need two separate installations of WildFly 8, which can be executed on either two different machines or on the same machine. When running on the same machine, it's practical to assign a virtual IP address to your machines so that you don't have any port conflict in your domain.

The following figure shows our domain project:

The first thing we need to do is bind the network interfaces to a valid inet address, both for the public and management interfaces. So, assuming that the first domain installation (master) will be bound to the inet address 192.168.1.1, open the host.xml file and change it accordingly, as follows:

<interfaces>
    <interface name="management">
        <inet-address value="192.168.1.1"/>
    </interface>
    <interface name="public...