In this recipe, we will learn how to install and configure VMware vSphere 5.5 SAN boot in EMC Storage.
Prepare a Cisco UCS 5108 Chassis with two UCS IOM 2208XP installed; each UCS IOM is connected to a Cisco UCS 6428UP. There is one UCS B200 M3, with one VIC 1240 installed into the Chassis. Configure four ports on each Cisco UCS 6428UP as an Ethernet uplink port (port 17/18) and FC uplink port (port 6/7), which is connected to SAN Switches and LAN Switches by Fibre Channel cables. The EMC SAN Storage has two controllers, and each controller has two FC ports, which are connected to SAN Switches. Prepare a UCS service profile, it includes two vNICs, and two vHBAs. The detail is listed in the following diagram: