Book Image

Networking Fundamentals

By : Gordon Davies
Book Image

Networking Fundamentals

By: Gordon Davies

Overview of this book

A network is a collection of computers, servers, mobile devices, or other computing devices connected for sharing data. This book will help you become well versed in basic networking concepts and prepare to pass Microsoft's MTA Networking Fundamentals Exam 98-366. Following Microsoft's official syllabus, the book starts by covering network infrastructures to help you differentiate intranets, internets, and extranets, and learn about network topologies. You’ll then get up to date with common network hardware devices such as routers and switches and the media types used to connect them together. As you advance, the book will take you through different protocols and services and the requirements to follow a standardized approach to networking. You’ll get to grips with the OSI and TCP/IP models as well as IPv4 and IPv6. The book also shows you how to recall IP addresses through name resolution. Finally, you’ll be able to practice everything you’ve learned and take the exam confidently with the help of mock tests. By the end of this networking book, you’ll have developed a strong foundation in the essential networking concepts needed to pass Exam 98-366.
Table of Contents (23 chapters)
Free Chapter
1
Section 1: Network Infrastructure
7
Section 2: Network Hardware
11
Section 3: Protocols and Services
18
Section 4: Mock Exams
19
Mock Exam 1
20
Mock Exam 2

Understanding interoperability with IPv4

Because IPv6 has not yet fully replaced IPv4, there needs to be a means of using the two protocols together to allow communication to take place. What if you are using IPv6 and the recipient is using IPv4? What if you are both using IPv6 but the data needs to transit through an IPv4 network or vice versa? Let's find out.

The MTA exam only requires you to have overview knowledge of the technologies we are going to cover.

Dual stack

Dual stack is a means for a network interface card to support and process IPv4 and IPv6 traffic simultaneously. To be able to do this, the NIC needs to have both protocols enabled and configured to have an IP address from each version, whether that is...