Book Image

Modern Computer Architecture and Organization

By : Jim Ledin
Book Image

Modern Computer Architecture and Organization

By: Jim Ledin

Overview of this book

Are you a software developer, systems designer, or computer architecture student looking for a methodical introduction to digital device architectures but overwhelmed by their complexity? This book will help you to learn how modern computer systems work, from the lowest level of transistor switching to the macro view of collaborating multiprocessor servers. You'll gain unique insights into the internal behavior of processors that execute the code developed in high-level languages and enable you to design more efficient and scalable software systems. The book will teach you the fundamentals of computer systems including transistors, logic gates, sequential logic, and instruction operations. You will learn details of modern processor architectures and instruction sets including x86, x64, ARM, and RISC-V. You will see how to implement a RISC-V processor in a low-cost FPGA board and how to write a quantum computing program and run it on an actual quantum computer. By the end of this book, you will have a thorough understanding of modern processor and computer architectures and the future directions these architectures are likely to take.
Table of Contents (20 chapters)
1
Section 1: Fundamentals of Computer Architecture
8
Section 2: Processor Architectures and Instruction Sets
14
Section 3: Applications of Computer Architecture

Implementing RISC-V in an FPGA

All of the source code, processor hardware design intellectual property, and development tools required to build and implement a complete RISC-V processor in a low-cost FPGA are freely available on the Internet. This section provides a high-level overview of the open source RISC-V design and the steps for bringing it up in an FPGA device. The total cost for the hardware to accomplish this task is less than US$200.

The RISC-V FPGA target in this example is the Digilent Arty A7-35T board, available at https://store.digilentinc.com/arty-a7-artix-7-fpga-development-board-for-makers-and-hobbyists/. The Arty A7-35T costs US$129 at the time of this writing.

The Arty A7-35T contains a Xilinx Artix-7 XC7A35TICSG324-1L FPGA, which can be programmed to implement a RISC-V processor. The XC7A35TICSG324-1L has the following features:

  • 5,200 logic slices.
  • 1,600 of the logic slices can implement a 64-bit RAM.
  • 41,600 flip-flops. Each logic slice contains...