Book Image

Learning ROS for Robotics Programming

By : Aaron Martinez, Enrique Fernández
Book Image

Learning ROS for Robotics Programming

By: Aaron Martinez, Enrique Fernández

Overview of this book

<p>Both the amateur and the professional roboticist who has ever tried their hand at robotics programming will have faced with the cumbersome task of starting from scratch, usually reinventing the wheel. ROS comes with a great number of already working functionalities, and this book takes you from the first steps to the most elaborate designs possible within this software framework.</p> <p>"Learning ROS for Robotics Programming" is full of practical examples that will help you to understand the framework from the very beginning. Build your own robot applications in a simulated environment and share your knowledge with the large community supporting ROS.</p> <p>"Learning ROS for Robotics Programming" starts with the basic concepts and usage of ROS in a very straightforward and practical manner. It is a painless introduction to the fascinating world of robotics, covering sensor integration, modeling, simulation, computer vision, and navigation algorithms, among other topics.</p> <p>After the first two chapters, concepts like topics, messages, and nodes will become daily bread. Make your robot see with HD cameras, or navigate avoiding obstacles with range sensors. Furthermore, thanks to the contributions of the vast ROS community, your robot will be able to navigate autonomously, and even recognize and interact with you, in a matter of minutes.</p> <p>"Learning ROS for Robotics Programming" will give you all the background you need to know in order to start in the fascinating world of robotics and program your own robot. Simply, you put the limit!</p>
Table of Contents (16 chapters)
Learning ROS for Robotics Programming
Credits
About the Authors
About the Reviewers
www.PacktPub.com
Preface
Index

Configuring the costmaps (global_costmap) and (local_costmap)


Okay, now we are going to start configuring the navigation stack and all the necessary files to start it. To start with the configuration, first we will learn what costmaps are and what they are used for. Our robot will move through the map using two types of navigation—global and local.

  • The global navigation is used to create paths for a goal in the map or a far-off distance

  • The local navigation is used to create paths in the nearby distances and avoid obstacles, for example, a square window of 4 x 4 meters around the robot

These modules use costmaps to keep all the information of our map. The global costmap is used for the global navigation and the local costmap for local navigation.

The costmaps have parameters to configure the behaviors, and they have common parameters as well, which are configured in a shared file.

Configuration basically consists of three files where we can set up different parameters. The files are as follows...