Book Image

3D printing with RepRap Cookbook

By : Salinas
Book Image

3D printing with RepRap Cookbook

By: Salinas

Overview of this book

A systematic guide consisting of over 100 recipes which focus on helping you understand the process of 3D printing using RepRap machines. The book aims at providing professionals with a series of working recipes to help make their fuzzy notions into real, saleable projects/objects using 3D printing technology. This book is for novice designers and artists who own a RepRap-based 3D printer, have fundamental knowledge of its working, and who desire to gain better mastery of the printing process. For the more experienced user, it will provide a handy visual resource, with side-by-side comparisons of the two most popular slicers, Skeinforge and Slic3r. A basic understanding of designing and modeling principles and elementary knowledge of digital modeling would be a plus.
Table of Contents (14 chapters)
13
Index

Setting up the Arduino IDE for your controller

Once you have plugged in your controller to the USB port and started up the Arduino IDE, two selections must be made. Refer to the following steps:

  1. Go to Tools in the menu and then go to Boards. From the cascaded menu, choose the controller board that you are using.
    Setting up the Arduino IDE for your controller
  2. Go back to Tools and choose Serial Port. From the cascaded menu, choose the COM port that your controller is using.