Book Image

3D printing with RepRap Cookbook

By : Richard Salinas
Book Image

3D printing with RepRap Cookbook

By: Richard Salinas

Overview of this book

Table of Contents (19 chapters)
3D Printing with RepRap Cookbook
About the Author
About the Reviewers

Using Skeinforge with a 0.35 mm nozzle

In this recipe, we will run a series of tests using the 0.35 mm nozzle to print the 0.3 mm, 0.2 mm, and 0.1 mm layers using a 3 mm filament.

Registering a bore size in Skeinforge is not a simple task. It requires you to calculate a ratio for each layer of a different thickness. Following the steps in this recipe will help you understand the process and make it easy to make adjustments for any change in the nozzle size or print layer.


If you don't have a 0.35 mm nozzle, then refer to the recipe that covers your nozzle size.

Getting ready

The Thingiverse website is a file-sharing site of user-created digital designs. It has many small models that can be used to make quick and efficient print tests. We'll use the one that's designed for surface calibration. It's a good shape for testing resolutions and small enough to print quickly, without much filament waste. It can be downloaded at

How to do it...

We will proceed as follows...