Browse Library
Sign In Start Free Trial
Close icon Search icon
Account
Browse Library Advanced Search Sign In Start Free Trial

Add to playlist

Create a Playlist

Modal Close icon
You need to login to use this feature.
  • Book Overview & Buying 3D printing with RepRap Cookbook
  • Table Of Contents Toc
  • Feedback & Rating feedback
3D printing with RepRap Cookbook

3D printing with RepRap Cookbook

By : Salinas
4.3 (4)
Buy this Book
close
close
3D printing with RepRap Cookbook

3D printing with RepRap Cookbook

4.3 (4)
By: Salinas
Buy this Book

Overview of this book

A systematic guide consisting of over 100 recipes which focus on helping you understand the process of 3D printing using RepRap machines. The book aims at providing professionals with a series of working recipes to help make their fuzzy notions into real, saleable projects/objects using 3D printing technology. This book is for novice designers and artists who own a RepRap-based 3D printer, have fundamental knowledge of its working, and who desire to gain better mastery of the printing process. For the more experienced user, it will provide a handy visual resource, with side-by-side comparisons of the two most popular slicers, Skeinforge and Slic3r. A basic understanding of designing and modeling principles and elementary knowledge of digital modeling would be a plus.
Table of Contents (14 chapters)
close
close
close
Preface
Icon
Preface
Icon
What this book covers
Icon
Who this book is for
Icon
What you need for this book
Icon
Pronterface
Icon
Repetier-Host
Icon
Conventions
Icon
Reader feedback
Icon
Customer support
Lock Free Chapter
1
1. Getting Started with 3D Printing
Icon
1. Getting Started with 3D Printing
Icon
Introduction
Icon
3D scanning with a digital camera
Icon
Processing a 3D scan with 123D Catch
Icon
Viewing your scene with 123D Catch
Icon
Stitching photos with 123D Catch
Icon
Changing mesh resolutions with 123D Catch
Icon
Cleaning up the model with 123D Catch
Icon
Using the Autodesk 3D Print Utility
Icon
Let's print!
Icon
Slicing the models with Slic3r
Icon
Slicing the models with Skeinforge
Icon
Reviewing the print results
2
2. Optimizing the Printing Process
Icon
2. Optimizing the Printing Process
Icon
Introduction
Icon
Inspecting the model with Meshmixer
Icon
Plane alignment with Meshmixer
Icon
Scaling the model with Meshmixer
Icon
Leveling the model with Meshmixer
Icon
Removing scanning artifacts with Meshmixer
Icon
Shaping the model with Meshmixer
Icon
Let's print!
Icon
Optimizing infill with Slic3r
3
3. Scanning and Printing with a Higher Resolution
Icon
3. Scanning and Printing with a Higher Resolution
Icon
Introduction
Icon
Setting up DAVID Laserscanner
Icon
Calibrating DAVID Laserscanner
Icon
Scanning with DAVID Laserscanner
Icon
Viewing the model in MeshLab
Icon
Cleaning the scans with MeshLab
Icon
Aligning the scans with MeshLab
Icon
Merging and remeshing the aligned scans in MeshLab
Icon
Let's print!
Icon
Tuning up the printer
Icon
Using Skeinforge with a 0.5 mm nozzle
Icon
Using Skeinforge with a 0.35 mm nozzle
Icon
Using Skeinforge with a 0.25 mm nozzle
Icon
Using Slic3r to print different resolutions
Icon
Reviewing the print results
4
4. Modeling and Printing with Precision
Icon
4. Modeling and Printing with Precision
Icon
Introduction
Icon
Warming up with SketchUp
Icon
Using 3D tools from the Extension Warehouse
Icon
Modeling with SketchUp
Icon
Using plugin extensions with SketchUp
Icon
Let's print!
Icon
Calibrating the x, y, and z axes
Icon
Controlling the flow rate in Skeinforge
Icon
Adjusting the scale in Skeinforge
Icon
Using Stretch in Skeinforge
Icon
Controlling print warping
Icon
Using brim with Slic3r
Icon
Reviewing the print results
5
5. Manipulating Meshes and Bridges
Icon
5. Manipulating Meshes and Bridges
Icon
Introduction
Icon
Exploring TopMod
Icon
Using TopMod for remeshing
Icon
Using MeshLab for remeshing
Icon
Mesh decimation with MeshLab
Icon
Wireframe modeling with TopMod
Icon
Let's print!
Icon
Cooling ABS and PLA with Skeinforge
Icon
Cooling ABS and PLA with Slic3r
Icon
Adjusting speed with Slic3r
Icon
Bridging with Slic3r
Icon
Adjusting speed with Skeinforge
Icon
Bridging with Skeinforge
Icon
Reviewing the print results
6
6. Making the Impossible
Icon
6. Making the Impossible
Icon
Introduction
Icon
Using extruding options in TopMod
Icon
Using cutting options in TopMod
Icon
Working with edges in TopMod
Icon
Creating handles in TopMod
Icon
Making a starfish in TopMod
Icon
Creating support with Meshmixer
Icon
Let's print!
Icon
Creating support with Skeinforge
Icon
Support options with Skeinforge
Icon
Creating support with Slic3r
Icon
Support options with Slic3r
Icon
Reviewing our print results
7
7. Texture – the Good and the Bad
Icon
7. Texture – the Good and the Bad
Icon
Introduction
Icon
Making textures with Meshmixer
Icon
Making stencils with Paint.NET
Icon
Stamping stencils with Meshmixer
Icon
Making patterns with Meshmixer
Icon
Making more patterns with Meshmixer
Icon
Making textures with MeshLab
Icon
Let's print!
Icon
Adjusting the travel speed with Skeinforge
Icon
Adjusting retraction with Skeinforge
Icon
Adjusting Jitter with Skeinforge
Icon
Adjusting the travel speed with Slic3r
Icon
Adjusting retraction with Slic3r
Icon
Randomizing the starting points with Slic3r
Icon
Reviewing the print results
8
8. Troubleshooting Issues in 3D Modeling
chevron up
Icon
8. Troubleshooting Issues in 3D Modeling
Icon
Introduction
Icon
Using Repetier-Host for analysis
Icon
Repairing mesh geometry issues
Icon
Using SketchUp for editing meshes
Icon
Using MeshLab for fixing normals
Icon
Using MeshLab for cleaning meshes
Icon
Creating a hollow model with MeshLab
Icon
Creating a drain hole with Meshmixer
9
9. Troubleshooting Issues in 3D Printing
Icon
9. Troubleshooting Issues in 3D Printing
Icon
Introduction
Icon
Leveling the build platform
Icon
Taking proper care of the build platform surface
Icon
Troubleshooting issues with the heat bed
Icon
Troubleshooting issues with the extruder
Icon
Troubleshooting issues with the hot end
Icon
Troubleshooting issues with the x, y, and z axes
Icon
Troubleshooting issues with the motor system
10
A. Understanding and Editing Firmware
Icon
A. Understanding and Editing Firmware
Icon
An Arduino IDE program
Icon
Getting Windows to recognize the controller
Icon
Getting the Arduino IDE to recognize the Sanguinololu
Icon
Setting up the Arduino IDE for your controller
Icon
Setting up the firmware in the Arduino IDE
Icon
Comparing firmware versions with WinMerge
Icon
Editing the firmware with the Arduino IDE
Icon
Uploading the firmware to the controller
11
B. Taking a Closer Look at G-code
Icon
B. Taking a Closer Look at G-code
Icon
Generating G-code
Icon
Viewing G-code
Icon
Basic G-code commands
Icon
Using the command line
12
C. Filament Options for RepRap Printers
Icon
C. Filament Options for RepRap Printers
Icon
Health considerations
Icon
An ABS filament
Icon
A PLA filament
Icon
A PET filament
Icon
A nylon filament
Icon
A HIPS filament
Icon
A TPE filament
Icon
A wood filament
Icon
A stone filament
Icon
A ceramic filament
Icon
A water-soluble PVA filament
Icon
Storage of 3D printing filaments
13
Index
Icon
Index

Creating a drain hole with Meshmixer

One of the most popular 3D printing services is Shapeways. It can be found at https://www.shapeways.com/. This service requires the model to have a drain hole if it is hollow or else it will be considered a solid. This is to allow the support material that's utilized to be removed.

In this recipe, we'll learn how to do this using Meshmixer and a fabricated part using SketchUp.

Getting ready

You'll need to make a small part with SketchUp. A dowel with a 3-mm diameter and a length of about 20 mm will suffice. It should resemble the following image:

Getting ready

You'll also need Meshmixer and the hollow support model you made in the previous recipe.

How to do it...

We will proceed as follows:

  1. Import the hollow support model. Adjust the orientation of the model with a good view of its bottom. The least obtrusive area for a small hole would be at the bottom. This is marked in the following image:
    How to do it...
  2. Now, go to File and select Import and then Append. Choose the...
Visually different images
CONTINUE READING
83
Tech Concepts
36
Programming languages
73
Tech Tools
Icon Unlimited access to the largest independent learning library in tech of over 8,000 expert-authored tech books and videos.
Icon Innovative learning tools, including AI book assistants, code context explainers, and text-to-speech.
Icon 50+ new titles added per month and exclusive early access to books as they are being written.
3D printing with RepRap Cookbook
End of Chapter 8
Next Chapter
notes
bookmark Notes and Bookmarks search Search in title playlist Add to playlist font-size Font size

Change the font size

margin-width Margin width

Change margin width

day-mode Day/Sepia/Night Modes

Change background colour

Close icon Search
Country selected
Close icon Your notes and bookmarks

Confirmation

Modal Close icon
claim successful
Order Page Read Now

Buy this book with your credits?

Modal Close icon
Are you sure you want to buy this book with one of your credits?
Close
YES, BUY

Submit Your Feedback

Modal Close icon
Modal Close icon
Modal Close icon