Book Image

BeagleBone Robotic Projects. - Second Edition

Book Image

BeagleBone Robotic Projects. - Second Edition

Overview of this book

BeagleBone Blue is effectively a small, light, cheap computer in a similar vein to Raspberry Pi and Arduino. It has all of the extensibility of today’s desktop machines, but without the bulk, expense, or noise. This project guide provides step-by-step instructions that enable anyone to use this new, low-cost platform in some fascinating robotics projects. By the time you are finished, your projects will be able to see, speak, listen, detect their surroundings, and move in a variety of amazing ways. The book begins with unpacking and powering up the components. This includes guidance on what to purchase and how to connect it all successfully, and a primer on programming the BeagleBone Blue. You will add additional software functionality available from the open source community, including making the system see using a webcam, hear using a microphone, and speak using a speaker. You will then learn to use the new hardware capability of the BeagleBone Blue to make your robots move, as well as discover how to add sonar sensors to avoid or find objects. Later, you will learn to remotely control your robot through iOS and Android devices. At the end of this book, you will see how to integrate all of these functionalities to work together, before developing the most impressive robotics projects: Drone and Submarine.
Table of Contents (18 chapters)
Title Page
Credits
Foreword
About the Author
About the Reviewers
www.PacktPub.com
Customer Feedback
Preface

About the Author

Dr. Richard Grimmett has been fascinated by computers and electronics from his very first programming project, which used Fortran on punch cards. He has bachelor's and master's degrees in electrical engineering and a PhD in leadership studies. He also has 26 years of experience in the radar and telecommunications industries, and even has one of the original brick phones. He now teaches computer science and electrical engineering at Brigham Young University, Idaho, where his office is filled with his many robotics projects.

 

I would certainly like to thank my wife, Jeanne, and family for providing me a wonderful, supportive environment that encourages me to take on projects like this one. I would also like to thank my students; they show me that amazing things can be accomplished by those who are unaware of the barriers.