Book Image

Industrial Automation from Scratch

By : Olushola Akande
Book Image

Industrial Automation from Scratch

By: Olushola Akande

Overview of this book

Industrial automation has become a popular solution for various industries looking to reduce manual labor inputs and costs by automating processes. This book helps you discover the abilities necessary for excelling in this field. The book starts with the basics of industrial automation before progressing to the application of switches, sensors, actuators, and motors, and a direct on-line (DOL) starter and its components, such as circuit breakers, contactors, and overload relay. Next, you'll explore VFDs, their parameter settings, and how they can be wired and programmed for induction motor control. As you advance, you'll learn the wiring and programming of major industrial automation tools – PLCs, HMIs, and SCADA. You’ll also get to grips with process control and measurements (temperature, pressure, level, and flow), along with analog signal processing with hands-on experience in connecting a 4–20 mA transmitter to a PLC. The concluding chapters will help you grasp various industrial network protocols such as FOUNDATION Fieldbus, Modbus, PROFIBUS, PROFINET, and HART, as well as emerging trends in manufacturing (Industry 4.0) and its empowering technologies (such as IoT, AI, and robotics). By the end of this book, you’ll have gained a practical understanding of industrial automation concepts for machine automation and control.
Table of Contents (21 chapters)
1
Part 1: Learning the Concepts and Skills Required to Get Started
8
Part 2: Understanding PLC, HMI, and SCADA
14
Part 3: Process Control, Industrial Network, and Smart Factory

Technical requirements

Our focus in this chapter is the use of CAD software (PCSCHEMATIC Automation) to draw circuit/schematic diagrams.

While efforts were made to make the chapter comprehensive for readers without the knowledge of the previous chapters, knowledge of Chapter 4, Overview Of AC and DC Motors, will be of help.

Steps to install the CAD software (PCSCHEMATIC Automation) will be provided in this chapter. You will need a computer system or laptop with the following minimum system requirements:

  • Operating system: Windows XP/Vista/7/8.1/10
  • Memory (RAM): 1 GB of RAM
  • Hard disk space: 400 MB of free space
  • Processor: Intel Pentium 4 or later