Book Image

Raspberry Pi cookbook for Python programmers

Book Image

Raspberry Pi cookbook for Python programmers

Overview of this book

Table of Contents (18 chapters)
Raspberry Pi Cookbook for Python Programmers
Credits
About the Author
About the Reviewers
www.PacktPub.com
Preface
Index

Controlling an LED


The hardware equivalent of hello world is an LED flash, which is a great test to ensure that everything is working and that you have wired it correctly. To make it a little more interesting, I've suggested using an RGB LED (it has red, green, and blue LEDs combined into a single unit), but feel free to use separate LEDs if that is all you have available.

Getting ready

You will need the following equipment:

  • 4x DuPont female to male patch wires

  • Mini breadboard (170 tie points) or a larger one

  • RGB LED (common cathode) / 3 standard LEDs (ideally red/green/blue)

  • Breadboarding wire (solid core)

  • 3x 470 ohm resistors

Each of the previous components should only cost a few dollars and can be reused for other projects afterwards. The breadboard is a particularly useful item that allows you to try out your own circuits without needing to solder them.

The diagrams of an RGB LED, standard LED, and RGB circuit

The following diagram shows the breadboard circuitry:

The wiring of an RGB LED / standard...