Now that we have connected ESP8266 to the Wi-Fi network, we can receive and send data on the internet. More than this, we can read data from the input or from the sensors attached to the board and send their values to the internet.

First, let's read some data and what is more interesting than the current weather data? Let's create an account on http://www.wunderground.com and then, go to https://www.wunderground.com/weather/api/d/pricing.htm, where you will purchase a key for $0, as shown in the following image. After filling some data about the project, you will have your key:

As you can see, with the developer key, you have 10 limited calls per minute that means you can get data every 6 seconds. Later in the code, we will get the data every 10 seconds.

To check your API_KEY, use it in a browser and check that you get any data. Replace APY_KEY with your own key:

After this if you navigate to this link in your browser, http://api.wunderground.com/api/APY_KEY/conditions/q/NL/Eindhoven.json; you will get the following JSON formatted response from the wunderground.com server:

Include the ESP8266WiFi library and the ESP8266HTTPClient library that will allow you to do an HTTP GET action to get the same JSON formatted message like you get using a browser:

#include <ESP8266WiFi.h> 
#include <ESP8266HTTPClient.h> 

Declare the SSID and the password of your Wi-Fi network:

const char* ssid     = "Your_WiFi_Name"; 
const char* password = "Your_WiFi_Password"; 
 
const String WUNDERGROUND_API_KEY = "YOUR_Wunderground_API_KEY"; 
const String WUNDERGROUND_COUNTRY = "NL"; 
const String WUNDERGROUND_CITY = "Eindhoven"; 

Construct the URL that will be used to get the data:

const String dataURL = "http://api.wunderground.com/api/"+WUNDERGROUND_API_KEY+"/conditions/q/"+WUNDERGROUND_COUNTRY+"/"+WUNDERGROUND_CITY+".json"; 

As usual, in the setup section, we will connect to the Wi-Fi network:

void setup() { 
Serial.begin(115200); 
delay(10); 
Serial.println(); 
Serial.println(); 
Serial.print("Connecting to "); 
Serial.println(ssid); 
 
WiFi.begin(ssid, password); 
 
while (WiFi.status() != WL_CONNECTED) { 
delay(500); 
Serial.print("."); 
  } 
 
Serial.println(""); 
Serial.println("WiFi connected");   
Serial.println("IP address: "); 
Serial.println(WiFi.localIP()); 
 
} 

In the loop, if the Wi-Fi status is connected, then you will instantiate an HTTPClient object named http and start getting data every 10 seconds from the previously constructed link. In the payload variable, you will have the entire response from the server:

void loop() 
{ 
if(WiFi.status() == WL_CONNECTED) 
  { 
HTTPClient http; 
http.begin(dataURL); 
inthttpCode = http.GET(); 
 
if(httpCode> 0) { 
            // HTTP header has been send and Server response header has been handled 
Serial.printf("[HTTP] GET... code: %d\n", httpCode); 
 
            // file found at server 
if(httpCode == HTTP_CODE_OK) { 
                String payload = http.getString(); 
Serial.println(payload); 
            } 
        }        
  } 
delay(10000); 
} 

If getting data every 10 seconds is too often, let's change it to once a minute by replacing the delay(10000) call that is blocking other code executions.

So, after const String WUNDERGROUND_CITY = "Eindhoven";, add two lines of code:

const long interval = 60 * 1000; 
unsigned long previousMillis = 0; 

Now, the loop function will change as follows:

void loop() 
{ 
unsigned long currentMillis = millis(); 
if(currentMillis - previousMillis >= interval)  
  { 
previousMillis = currentMillis;    
if(WiFi.status() == WL_CONNECTED) 
    { 
HTTPClient http; 
http.begin(dataURL); 
inthttpCode = http.GET(); 
 
if(httpCode > 0) { 
            // HTTP header has been send and Server response header has been handled 
Serial.printf("[HTTP] GET... code: %d\n", httpCode); 
 
            // file found at server 
if(httpCode == HTTP_CODE_OK) { 
                String payload = http.getString(); 
Serial.println(payload); 
            } 
        }        
    } 
  } 
} 

Now, the Serial Monitor will show a huge JSON with all the information about the weather from temperature to humidity, wind speed, dew point and much more every minute, as follows:

But what if you want to get only some specific data from this JSON? Fortunately, there is a Wunderground library for this. To install it, go to Sketch | Include Library | Manage Libraries and search for ESP8266 Weather Station. After installing this library, you also need to install the Json Straming Parser library that will parse the received JSON. You can follow these steps:

Now, let's get the same data, so the same API_KEY will be used but the data is parsed by library functions:

#include <ESP8266WiFi.h> 
#include <JsonListener.h> 
#include "WundergroundClient.h" 

const String  WUNDERGRROUND_API_KEY = "YOUR_API_KEY"; 
constboolean IS_METRIC = true; 

WundergroundClientweather_data(IS_METRIC); 

const char* WIFI_SSID     = "YOUR_WIFI_SSID"; 
const char* WIFI_PASSWORD = "YOUR_WIFI_PASSWORD"; 
const String WUNDERGROUND_LANGUAGE = "EN"; 
const String WUNDERGROUND_COUNTRY = "NL"; 
const String WUNDERGROUND_CITY = "Eindhoven"; 
WiFiClientwifiClient; 

void setup() { 
Serial.begin(115200); 
delay(10); 
 
WiFi.begin(WIFI_SSID, WIFI_PASSWORD); 
delay(20); 
Serial.print("Connecting to "); 
Serial.println(WIFI_SSID); 
while (WiFi.status() != WL_CONNECTED) { 
delay(500); 
Serial.print("."); 
  } 
Serial.println(""); 
Serial.println("WiFi connected!"); 
Serial.println(); 
} 

void loop() { 
 
if ((millis() % (60 * 1000)) == 0) {  
Serial.println(); 
Serial.println("\n\nNext Loop-Step: " + String(millis()) + ":"); 
 
weather_data.updateConditions(WUNDERGRROUND_API_KEY, WUNDERGROUND_LANGUAGE, WUNDERGROUND_COUNTRY, WUNDERGROUND_CITY); 
 
Serial.println("wundergroundHours: " + weather_data.getHours()); 
Serial.println("wundergroundMinutes: " + weather_data.getMinutes()); 
Serial.println("wundergroundSeconds: " + weather_data.getSeconds()); 
Serial.println("wundergroundDate: " + weather_data.getDate()); 
 
Serial.println("wundergroundMoonPctIlum: " + weather_data.getMoonPctIlum()); 
Serial.println("wundergroundMoonAge: " + weather_data.getMoonAge()); 
Serial.println("wundergroundMoonPhase: " + weather_data.getMoonPhase()); 
Serial.println("wundergroundSunriseTime: " + weather_data.getSunriseTime()); 
Serial.println("wundergroundSunsetTime: " + weather_data.getSunsetTime()); 
Serial.println("wundergroundMoonriseTime: " + weather_data.getMoonriseTime()); 
Serial.println("wundergroundMoonsetTime: " + weather_data.getMoonsetTime()); 
Serial.println("wundergroundWindSpeed: " + weather_data.getWindSpeed()); 
Serial.println("wundergroundWindDir: " + weather_data.getWindDir()); 
 
Serial.println("wundergroundCurrentTemp: " + weather_data.getCurrentTemp()); 
Serial.println("wundergroundTodayIcon: " + weather_data.getTodayIcon()); 
Serial.println("wundergroundTodayIconText: " + weather_data.getTodayIconText()); 
Serial.println("wundergroundMeteoconIcon: " + weather_data.getMeteoconIcon(weather_data.getTodayIconText())); 
Serial.println("wundergroundWeatherText: " + weather_data.getWeatherText()); 
Serial.println("wundergroundHumidity: " + weather_data.getHumidity()); 
Serial.println("wundergroundPressure: " + weather_data.getPressure()); 
Serial.println("wundergroundDewPoint: " + weather_data.getDewPoint()); 
Serial.println("wundergroundPrecipitationToday: " + weather_data.getPrecipitationToday()); 
 
Serial.println(); 
Serial.println("---------------------------------------------------/\n"); 
  } 
}