Book Image

Operator Training Simulator Handbook

By : Joseph Philip
Book Image

Operator Training Simulator Handbook

By: Joseph Philip

Overview of this book

Operator training simulators in the process industry have been around since the 1970s, but you may not find a book that documents the development of these systems and the standard best practices. The Operator Training Simulator Handbook covers best practices for OTS engineering and OTS training development and delivery, starting from the basic the jargon and the different types of OTS systems. It will take you through the best approaches to project specification as well as building, maintenance, planning, and delivering these systems by sharing real-life experiences and dos and don’ts. As you advance, you'll uncover the various challenges in the planning and delivery of operator training models and understand how to address those by working through real-world projects. This book helps in specifying the best fit for purpose, choosing a cost-effective system when acquiring an OTS. You'll also learn how you can turn your OTS projects into digital twins before finally learning all about documentation in a typical OTS project, covering the sample structure that you can use as a starting point in your projects. By the end of the book, you'll have learned best practices for developing operator training simulator systems and have a reference guide to overcome common challenges.
Table of Contents (11 chapters)
1
Section 1: Introduction, Definitions, and Classifications
3
Section 2: Best Practices for the Development of OTS Systems
6
Section 3: OTS' Future, Training Model, and Reference Documents

Summary

In this chapter, we have shown summaries of all major documents in an OTS project. These were specifically related to a V-model delivery process. But that does not mean other delivery models will not need these documents.

All the documents mentioned in this chapter are the minimum documentation needed on a typical OTS project.

By providing these templates, I hope you can use them as a starting point for your OTS project rather than reinventing the wheel.