Book Image

Hands-On ROS for Robotics Programming

By : Bernardo Ronquillo Japón
Book Image

Hands-On ROS for Robotics Programming

By: Bernardo Ronquillo Japón

Overview of this book

Connecting a physical robot to a robot simulation using the Robot Operating System (ROS) infrastructure is one of the most common challenges faced by ROS engineers. With this book, you'll learn how to simulate a robot in a virtual environment and achieve desired behavior in equivalent real-world scenarios. This book starts with an introduction to GoPiGo3 and the sensors and actuators with which it is equipped. You'll then work with GoPiGo3's digital twin by creating a 3D model from scratch and running a simulation in ROS using Gazebo. Next, the book will show you how to use GoPiGo3 to build and run an autonomous mobile robot that is aware of its surroundings. Finally, you'll find out how a robot can learn tasks that have not been programmed in the code but are acquired by observing its environment. You'll even cover topics such as deep learning and reinforcement learning. By the end of this robot programming book, you'll be well-versed with the basics of building specific-purpose applications in robotics and developing highly intelligent autonomous robots from scratch.
Table of Contents (19 chapters)
1
Section 1: Physical Robot Assembly and Testing
5
Section 2: Robot Simulation with Gazebo
8
Section 3: Autonomous Navigation Using SLAM
13
Section 4: Adaptive Robot Behavior Using Machine Learning

Summary

This chapter provided a quick introduction to ML in robotics. We expect you to have acquired insight into what ML and deep learning are, qualitatively understood how a neural network processes images to recognize objects, and can operationally implement the algorithm in a simulated and/or physical robot.

ML is a very wide field and you should not expect nor really need to get an expert in the field. What you need to assimilate is the knowledge to integrate deep learning capabilities in your robots.

As you have seen in the practical case, we have used a pretrained model that covers common objects. Then, we have simply used this model and have not needed additional training. There are plenty of trained models on the web shared by data science companies and open source developers. You should spend time looking for these models, and only go to train your own models when the...