Armed with this knowledge about SNMP OIDs, let's get to the real deal—getting SNMP data into Zabbix. To make the following steps easier, you should choose an entry that returns string data. We could use a UPS serial number, such as the one discovered previously to be PowerNet-MIB::upsAdvIdentSerialNumber.0
. Do the same for some network printer or manageable switch; if you don't have access to such a device, you can choose a simple entry from the Net-SNMP enabled host, such as the already mentioned system description, SNMPv2-MIB::sysDescr.0
.
Now is the time to return to the Zabbix interface. Go to Configuration | Hosts, and click on Create host. Then, fill in the following values:
Host name: Enter
SNMP device
.- Groups: If in the In groups listbox there's a group, select it and click on the button.
New group: Enter
SNMP devices
.SNMP interfaces: Click on Add.
DNS NAME or IP ADDRESS: Enter the correct DNS name or IP address next to the SNMP interfaces we just added...