Let's get started with various aspects of the Wireshark interface.
This contains the default title of Wireshark along with the current version in use. To enable or disable the title, navigate to Edit | Preferences | User Interface and modify the option Welcome screen and title bar shows version to suit your requirement. To modify the title, navigate to Edit | Preferences | User Interface | Layout and enter a suitable title in the Custom window title field as shown in the following figure:
The Menu bar hosts the features of Wireshark, all categorized under suitable titles. These options will be taken up as and when required during the course of this book. As an example, you can look at the authors involved in the development of Wireshark by navigating to Help | About Wireshark and selecting the Authors tab.
This is how it will look:
The main toolbar contains the icons for more frequently used items in Wireshark. You will note that some options are grayed out. This is because not all the options are available in the current context. Once we start the capture, we will see most of them highlighted and available for use.
Filtering the traffic can help analysts find a needle in a haystack. There are two types of filtering options available in Wireshark. One is called capture filters, and the second is called display filters.
Capture filters define which frames will be captured and sent to Wireshark's capture engine for processing and later displayed in Wireshark, while display filters define which frames are displayed after they are captured. We can redefine display filters without restarting the capture, which is not the case for capture filters; hence, we need to be cautious with their usage. The Expression option on the side helps us create the filter expressions in an easy way, as there is a huge list of filters, and we don't need to waste our time memorizing them.
Wireshark aids by providing visual indicators whether or not a filter used by us is correct (accepted by Wireshark), by changing the background color to red (wrong filter expression) and to green (correct filter expression) as shown in the following screenshot:
Wrong filter
This is the correct filter will look something like this:
Correct filter
Note
You may notice that sometimes the filter shows a yellow background. This might be due to the fact that the filter expression which you entered is not working as expected. An example could be using 
instead of the correct filter, that is, 
.
Once the filter expression is ready, you can either press ENTER, or click on Apply for that filter to be applied on the selected list of packets, and you can remove the current filter expression by clicking on Clear.
After spending some time creating filters, you will notice that you are combining a lot of them using multiple AND (&&) and OR (||) statements and would also want to use the same filter expression in another capture file. For this purpose, you can save your filters in Wireshark, using the Save button at the extreme right of filter toolbar.
Filter to see only HTTP GET requests made by 192.168.20.130
This frame helps in identifying the interface to start capturing packets from and the associated options with those interfaces.
Here, at the capture frame, we have three ways to start capturing:
Interface List: If you're not sure about the active interface to use for capture, selecting this option is a good choice as it gives you a complete list of the available interfaces, IP addresses in use, and the number of packets transmitted per interface. Using this information, we can easily figure out which interface to use to capture traffic.
Simply
the interface, and click on Start to begin the capture.
Start: This is the simplest and quickest way to start the capture if you know the network interface(s) in question. All you need to do is select the interface(s) from the available list of interfaces and click on Start.
Capture Options: This is an advanced way to start a capture, as it provides tweaking capabilities before a capture is even started.
Here you can
an individual interface to capture or 
Capture on all interfaces, to do exactly what it says.
By clicking on Capture Filter, you can select/create any filter before capturing begins. After this, you have some options that can be tweaked to perform unattended captures. For example, we want to create multiple files of 200 KB and stop the capture automatically after 2 minutes. The following screenshot shows how this is done:
Configuring for multiple files
The following are the resultant files:
Multiple files
Note
Wireshark saves the filename in FileName_FileNumber_YEARMMDDHRMINSEC.pcap format.
For details regarding the other options on this frame please go to https://www.wireshark.org/docs/wsug_html_chunked/ChCapCaptureOptions.html.
The following is how the Capture Help menu looks and later on we will see a description of the available options under this menu.
Here, we have two options that can help us with capturing using Wireshark in an efficient manner. Clicking on these options will redirect the user to:
When the reader clicks on How to Capture they will be redirected to http://wiki.wireshark.org/CaptureSetup.
When the reader clicks on Network Media they will be redirected to http://wiki.wireshark.org/CaptureSetup/NetworkMedia.
The following is how the Files menu looks and later on we will see a description of the available options under this menu.
This menu provides options to:
Browse and open an already captured trace file.
Click and open any recently opened file. The number of recent files to be listed here can be modified by going to Edit | Preferences | User Interface and then editing the Maximum recent files option to the value of choice.
Download sample capture files available at the official site (http://wiki.wireshark.org/SampleCaptures).
As the name suggests, clicking on the options listed under this category redirects us to Wireshark's online resources.
The Status bar is used to display informational messages. It is divided into the following three sections:
The left side of the Status bar shows context-related information, which includes the colorized bullet indicating the current expert-info level and an option to edit or add capture comments.
The middle part shows the current number of packets and the load time.
The right side of the Status bar shows the current configuration profile in use. By default, there are three profiles present [Default, Bluetooth, and Classic], and one can always create and use new configuration profiles as required.
Status bar