Book Image

Linux Networking Cookbook

By : Agnello Dsouza, Gregory Boyce
5 (1)
Book Image

Linux Networking Cookbook

5 (1)
By: Agnello Dsouza, Gregory Boyce

Overview of this book

Linux can be configured as a networked workstation, a DNS server, a mail server, a firewall, a gateway router, and many other things. These are all part of administration tasks, hence network administration is one of the main tasks of Linux system administration. By knowing how to configure system network interfaces in a reliable and optimal manner, Linux administrators can deploy and configure several network services including file, web, mail, and servers while working in large enterprise environments. Starting with a simple Linux router that passes traffic between two private networks, you will see how to enable NAT on the router in order to allow Internet access from the network, and will also enable DHCP on the network to ease configuration of client systems. You will then move on to configuring your own DNS server on your local network using bind9 and tying it into your DHCP server to allow automatic configuration of local hostnames. You will then future enable your network by setting up IPv6 via tunnel providers. Moving on, we’ll configure Samba to centralize authentication for your network services; we will also configure Linux client to leverage it for authentication, and set up a RADIUS server that uses the directory server for authentication. Toward the end, you will have a network with a number of services running on it, and will implement monitoring in order to detect problems as they occur.
Table of Contents (19 chapters)
Linux Networking Cookbook
Credits
About the Author
About the Reviewer
www.PacktPub.com
Preface
Index

Route an IPv6 netblock to your local network


So far, all we've done is allocate a single IPv6 address to your machine that is hosting the tunnel. One of the nice things about IPv6 however, is the ability to obtain a large number of public IP addresses for your local networks rather than using NAT. In fact, Hurricane Electric and SixXS both offer complementary /48 networks to use with your tunnel. A /48 includes 2^80 IP addresses, or 1,208,925,819,614,629,174,706,176. Much better than the one IPv4 address you typically get from a consumer IP address. To utilize them, you just need to advertise their availability.

How to do it...

Install radvd via your package management system:

  1. Configure /etc/radvd.conf:

    interface eth1
    {
       AdvSendAdvert on;
       prefix 2001:DB8:1:1::/64
       {
       };
    };
  2. Start radvd via the init script or as appropriate for your distribution.

How it works…

Rather than requiring DHCP for IP address allocation (although DHCPv6 is available if desired), IPv6 implements the Neighbor Discovery...