In this recipe, we will learn how to create a 3PAR Remote Copy on HP 3PAR StoreServ 7200 between two sites by IP connection.
In this example there are two datacenters, local and remote . Assume that they have a Cisco UCS 5108 Chassis with some Cisco UCS B200 M3 and two Cisco UCS 6248 Fabric Interconnects on each site. Each Fabric Interconnect is connected to two pairs of FC SAN Switches and two pairs of Ethernet LAN Switches. HP 3PAR Storeserv 7200 is connected to Cisco UCS B200 M3 through two FC SAN Switches. You have installed Microsoft Windows 2008 R2 on each UCS B200 M3 in SAN boot. The hardware configuration of remote site is the same as local site. There are two 1 GB Ethernet connections between both local and remote site's 3PAR 7200. The following diagram shows the details:
The following table lists the details of each device components:
Sites |
Device components |
Detail |
---|---|---|
Production... |