Book Image

Network Analysis using Wireshark 2 Cookbook - Second Edition

By : Nagendra Kumar Nainar, Yoram Orzach, Yogesh Ramdoss
Book Image

Network Analysis using Wireshark 2 Cookbook - Second Edition

By: Nagendra Kumar Nainar, Yoram Orzach, Yogesh Ramdoss

Overview of this book

This book contains practical recipes on troubleshooting a data communications network. This second version of the book focuses on Wireshark 2, which has already gained a lot of traction due to the enhanced features that it offers to users. The book expands on some of the subjects explored in the first version, including TCP performance, network security, Wireless LAN, and how to use Wireshark for cloud and virtual system monitoring. You will learn how to analyze end-to-end IPv4 and IPv6 connectivity failures for Unicast and Multicast traffic using Wireshark. It also includes Wireshark capture files so that you can practice what you’ve learned in the book. You will understand the normal operation of E-mail protocols and learn how to use Wireshark for basic analysis and troubleshooting. Using Wireshark, you will be able to resolve and troubleshoot common applications that are used in an enterprise network, like NetBIOS and SMB protocols. Finally, you will also be able to measure network parameters, check for network problems caused by them, and solve them effectively. By the end of this book, you’ll know how to analyze traffic, find patterns of various offending traffic, and secure your network from them.
Table of Contents (20 chapters)

Capturing wireless LAN traffic

Capturing options

If you are trying to capture traffic between a wireless station running Wireshark and other wired/wireless machines in the network, and interested only in regular network data, not in 802.11 control packets or radio/link-layer information, then you don't have to do anything special. Just open Wireshark, choose the specific wireless interface you are interested in, apply the necessary filters and run it in promiscuous mode.

Using Wireshark, if you want to capture traffic between different processes running within the wireless station, then the capture should be done on a loopback interface.

If you are trying to capture traffic that is not only sent to or from the wireless...