Book Image

Cisco Unified Communications Manager 8: Expert Administration Cookbook

By : Tanner Ezell
Book Image

Cisco Unified Communications Manager 8: Expert Administration Cookbook

By: Tanner Ezell

Overview of this book

Cisco Unified Communications Manager (CUCM) is a software-based call-processing system developed by Cisco Systems. CUCM tracks all active VoIP network components; these include phones, gateways, conference bridges, transcoding resources, and voicemail boxes among others. This scalable, distributable, highly-available enterprise-class system delivers voice, video, mobility, and presence services. It connects up to 30,000 users of IP phones, media processing devices, VoIP gateways, mobile devices, and multimedia applications. With this cookbook you will learn all the important aspects of administering Cisco Unified Communications Manager. Cisco Unified Communications Manager 8: Expert Administration Cookbook is filled with many advanced recipes to effectively and efficiently configure and manage Cisco Unified Communications Manager. This book covers everything an administrator needs during and after Cisco Unified Communications Manager implementation. This practical cookbook contains detailed step-by-step instructions with clear and informative screenshots that cover all the important and advanced aspects of administering Cisco Unified Communications Manager. The book starts with introducing Call Routing and E.164. It then covers configuration and design information for the various call admission control technologies and Media Resources. The book also dives deep into troubleshooting, upgrades, disaster recovery, user management and much more.
Table of Contents (18 chapters)
Cisco Unified Communications Manager 8: Expert Administration Cookbook
Credits
About the Author
About the Reviewers
www.PacktPub.com
Preface
Index

Configuring transcoders


Transcoders are often necessary for third-party software appliances such as voice mail systems and IVRs. Additionally, when using a low bandwidth codec such as G.729, transcoding will be necessary.

How to do it...

To configure transcoders using IOS devices, perform the following:

  1. Navigate to the Transcoder page (Media Resources | Transcoder).

  2. Click on Add New to add a new transcoder.

  3. Select a Transcoder Type. This selection is determined by the hardware in use.

  4. Specify the Device Name. This is the name as configured on the IOS device.

  5. Select an appropriate Device Pool:

  6. Click on Save.

Once the transcoder is configured on both the IOS device and the Unified Communications Manager, it will show as registered.

Note

For an example configuration for an IOS device see Cisco's Enhanced Transcoding and Conferencing for IOS Voice Gateways in a CallMananger Network using DSP Resources Configuration Example (http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008084fe1f...