Book Image

Hands-On MQTT Programming with Python

By : Gaston C. Hillar
Book Image

Hands-On MQTT Programming with Python

By: Gaston C. Hillar

Overview of this book

<p>MQTT is a lightweight messaging protocol for small sensors and mobile devices. This book explores the features of the latest versions of MQTT for IoT and M2M communications, how to use them with Python 3, and allow you to interact with sensors and actuators using Python.</p> <p>The book begins with the specific vocabulary of MQTT and its working modes, followed by installing a Mosquitto MQTT broker. You will use different utilities and diagrams to understand the most important concepts related to MQTT. You will learn to make all the necessary configuration to work with digital certificates for encrypting all data sent between the MQTT clients and the server. You will also work with the different Quality of Service levels and later analyze and compare their overheads.</p> <p>You will write Python 3.x code to control a vehicle with MQTT messages delivered through encrypted connections (TLS 1.2), and learn how leverage your knowledge of the MQTT protocol to build a solution based on requirements. Towards the end, you will write Python code to use the PubNub cloud-based real-time MQTT provider to monitor a surfing competition.</p> <p>In the end, you will have a solution that was built from scratch by analyzing the requirements and then write Python code that will run on water-proof IoT boards connected to multiple sensors in surfboards.</p>
Table of Contents (9 chapters)

Working with at least once delivery (QoS level 1)

First, we will use wildcards to subscribe to a topic filter with QoS level 1, and then we will publish one message to a topic name that will match the topic filter with QoS level 1. This way, we will analyze how both publishing and subscription work with QoS level 1.

We will use the mosquitto_sub command-line utility included in Mosquitto to generate a simple MQTT client that subscribes to a topic filter with QoS level 1 and prints all the messages it receives. Open a Terminal in macOS or Linux, or a Command Prompt in Windows, go to the directory in which Mosquitto is installed, and run the following command:

mosquitto_sub -V mqttv311 -t sensors/+/altitude -q 1 -d

The previous command will create an MQTT client that will establish a connection with the local MQTT server and then will make the client subscribe to the topic filter...