Book Image

Hyper-V Network Virtualization Cookbook

By : Ryan Boud
Book Image

Hyper-V Network Virtualization Cookbook

By: Ryan Boud

Overview of this book

Related Content you might be interested in

Current Title:

Small book image
Hyper-V Network Virtualization Cookbook
Ryan Boud
Nov, 2014 | 228 pages
No titles found
Table of Contents (16 chapters)
Hyper-V Network Virtualization Cookbook
Hyper-V Network Virtualization Cookbook
Credits
Credits
About the Author
About the Author
About the Reviewers
About the Reviewers
www.PacktPub.com
www.PacktPub.com
Preface
Preface
Free Chapter
1
Installing Virtual Machine Manager
Installing Virtual Machine Manager
Introduction
Deploying the required service accounts
Creating the distributed key management container in Active Directory
Installing Virtual Machine Manager on a single server
Installing a highly available Virtual Machine Manager server
2
Configuring Networks for Hyper-V Network Virtualization
Configuring Networks for Hyper-V Network Virtualization
Introduction
Creating the required Logical Networks in Virtual Machine Manager
Creating the required Port Profiles in Virtual Machine Manager
Creating and assigning Logical Switches to Hyper-V hosts
Creating the Virtual Machine Networks for Tenants
Testing the basic Virtual Machine Networks
3
Creating the Gateway for Virtual Machine Communications
Creating the Gateway for Virtual Machine Communications
Introduction
Creating a Logical Network, Port Profiles, and Logical Switches for external access
Creating a Hyper-V Network Virtualization gateway manually
Creating a Hyper-V Network Virtualization gateway with a Service Template
4
IP Address Management Integration with VMM for Hyper-V Network Virtualization
IP Address Management Integration with VMM for Hyper-V Network Virtualization
Introduction
Installing IPAM in Windows Server 2012 R2
Integrating IPAM into VMM
Using IPAM data for reporting
5
Windows Server Gateway Configuration
Windows Server Gateway Configuration
Introduction
Network Address Translation with the gateway
Direct Routing and how it is different from NAT
6
Implementing Network Isolation in Hyper-V
Implementing Network Isolation in Hyper-V
Introduction
Understanding VLANs in Hyper-V and VMM, including the PowerShell cmdlets
Understanding Private VLANs in Hyper-V and VMM, including the PowerShell cmdlets
7
Network Access Control Lists
Network Access Control Lists
Introduction
Locking down a VM for security access
Applying rules to a list of VMs
VM Templates
VM Templates
Configuration
Sysprep
Planning the Virtual Machine Manager
Planning the Virtual Machine Manager
Preparing
How to plan the Virtual Machine Manager
Index
Index

Network Address Translation with the gateway

In Chapter 3, Creating the Gateway for Virtual Machine Communications, you created a Windows Server Gateway so that VMs could access resources outside of the VM Network they resided upon. This access was only one way: outbound; this recipe will show you how to create inbound NAT rules on the gateway to allow access to your VM's resources. A typical use case of this would be to host a website behind a public IP address.

In this recipe, you will create a simple web server and publish it using NAT rules on the Windows Server Gateway.

Getting ready

For this recipe, you will need access to a computer that is outside of the VM Networks created so far, but it can access the IP range you used for the external network.

How to do it…

The following diagram shows you the high-level steps involved in this recipe:

Now, perform the following steps:

  1. Start a Tenant A VM on your Hyper-V cluster; in this case, Tenant A – VM 10.

  2. Once the VM has started, log on to the VM...

Previous Section
End of Section 3
Next Section