Book Image

Hyper-V Network Virtualization Cookbook

By : Ryan Boud
Book Image

Hyper-V Network Virtualization Cookbook

By: Ryan Boud

Overview of this book

Related Content you might be interested in

Current Title:

Small book image
Hyper-V Network Virtualization Cookbook
Ryan Boud
Nov, 2014 | 228 pages
No titles found
Table of Contents (16 chapters)
Hyper-V Network Virtualization Cookbook
Hyper-V Network Virtualization Cookbook
Credits
Credits
About the Author
About the Author
About the Reviewers
About the Reviewers
www.PacktPub.com
www.PacktPub.com
Preface
Preface
Free Chapter
1
Installing Virtual Machine Manager
Installing Virtual Machine Manager
Introduction
Deploying the required service accounts
Creating the distributed key management container in Active Directory
Installing Virtual Machine Manager on a single server
Installing a highly available Virtual Machine Manager server
2
Configuring Networks for Hyper-V Network Virtualization
Configuring Networks for Hyper-V Network Virtualization
Introduction
Creating the required Logical Networks in Virtual Machine Manager
Creating the required Port Profiles in Virtual Machine Manager
Creating and assigning Logical Switches to Hyper-V hosts
Creating the Virtual Machine Networks for Tenants
Testing the basic Virtual Machine Networks
3
Creating the Gateway for Virtual Machine Communications
Creating the Gateway for Virtual Machine Communications
Introduction
Creating a Logical Network, Port Profiles, and Logical Switches for external access
Creating a Hyper-V Network Virtualization gateway manually
Creating a Hyper-V Network Virtualization gateway with a Service Template
4
IP Address Management Integration with VMM for Hyper-V Network Virtualization
IP Address Management Integration with VMM for Hyper-V Network Virtualization
Introduction
Installing IPAM in Windows Server 2012 R2
Integrating IPAM into VMM
Using IPAM data for reporting
5
Windows Server Gateway Configuration
Windows Server Gateway Configuration
Introduction
Network Address Translation with the gateway
Direct Routing and how it is different from NAT
6
Implementing Network Isolation in Hyper-V
Implementing Network Isolation in Hyper-V
Introduction
Understanding VLANs in Hyper-V and VMM, including the PowerShell cmdlets
Understanding Private VLANs in Hyper-V and VMM, including the PowerShell cmdlets
7
Network Access Control Lists
Network Access Control Lists
Introduction
Locking down a VM for security access
Applying rules to a list of VMs
VM Templates
VM Templates
Configuration
Sysprep
Planning the Virtual Machine Manager
Planning the Virtual Machine Manager
Preparing
How to plan the Virtual Machine Manager
Index
Index

Direct Routing and how it is different from NAT

Direct Routing does not mask the VM Network to external networks unlike NAT, which can expose port numbers and then direct that traffic to the correct VM and (optionally) a different port.

Direct Routing works more like a traditional router and as such a Windows Server Gateway that is configured in Direct Routing mode can only support a single VM Network, whereas Windows Server Gateways configured for NAT can support up to 50 VM Networks by default.

In this recipe, you will create a simple web server and it will be available to computers outside of the HNV network using its HNV IP address; NAT will not be used.

Getting ready

You should have completed the Creating HNV Gateways with Service Templates recipe in Chapter 3, Creating the Gateway for Virtual Machine Communications, as this recipe relies upon the service template that was created in that recipe.

A new Windows Server Gateway will be provisioned for use by this recipe as it will be dedicated...

Previous Section
End of Chapter 5
Next Chapter