If you did not use a fax on your SBS 2003 system, then you can skip this section; however, if you did, or you want to add a fax, follow these instructions:
Install the modem.
Install and start the Fax Service.
Migrate the fax data across.
Configure the Fax Service.
Note
If you are running as a Hyper-V virtualized machine, you will not be able to add a normal serial modem, but would be required to have a software modem, which is far less common. For that reason, you may not be able to complete this section if you are running with Hyper-V.
Open up Control Panel and double-click on Phone and Modem Options.
It is probable that your modem will not be listed, so you will need to add the modem by clicking on the Add button. You should then be able to click on Next to start the detection process and SBS 2008 will find your modem.
If your modem is found, click on Finish. If it is not, check that your modem is powered on and that the connections to your server are...