-
Book Overview & Buying
-
Table Of Contents
Red Hat Enterprise Linux Troubleshooting Guide
By :
In the previous chapter, Chapter 7, FileSystem Errors and Recovery we noticed a simple RAID failure message in our /var/log/messages log file. In this chapter, we used a Data Collector approach to investigate the cause of that failure message.
After investigating with the RAID management command mdadm, we found several RAID devices in a degraded state. Using dmesg, we were able to determine which hard drive devices were affected and that the disks at some point were removed from service. We also found that the disk event counts were mismatched, preventing the disks from being re-added automatically.
We verified that the devices were not physically faulty with dmesg and choose to re-add them to the RAID array.
While this chapter focused heavily on RAID and disk failures, both /var/log/messages and dmesg can be used to troubleshoot other device failures. For devices other than hard disks, however, the solution is often a simple replacement. Of course, like most things, this depends on...
Change the font size
Change margin width
Change background colour