In this section, we will create a project that allows us to monitor a USB camera that is connected to an Arduino YUN, which has a USB port and includes communication with Ethernet and Wi-Fi. So, it has many advantages. We will work on making a network between the Raspberry Pi and the Arduino YUN, so the main idea is to monitor the camera from a web page, from the Raspberry Pi. The page will be stored in the Raspberry Pi.
We will use a Logitech camera that supports the UVC protocol:
Now we will explain the steps to install our camera in the Arduino YUN:
Connect the board to your Wi-Fi router
Verify the IP address of the Arduino YUN
After we type the IP address, the following screen appears:
We will now issue a series of commands at the Command Prompt to complete the setup:
Update the package:
opkg update
Install the UVC protocol:
opkg install kmod-video-uvc
Install the camera driver:
opkg install fswebcam
Download the Mjpgstreamer...