Adding basic components

Start by adding the most basic components by expanding the Components tree under the Windows Image section in the left-hand side corner of the tool. Let's now add language and locale information:

First, add the amd64_Microsoft-Windows-International-Core-WinPE components to Pass1 and fill it with the basic language options. The generated XML part with all the mandatory parameters will look like the following code:

<?xml version="1.0" encoding="UTF-8"?>
<component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" language="neutral" versionScope="nonSxS" publicKeyToken="31bf3856ad364e35" processorArchitecture="amd64" name="Microsoft-Windows-International-Core-WinPE">
  <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
  </SetupUILanguage>
  <InputLocale>en-US</InputLocale>
  <UILanguage>en-US</UILanguage>
  <SystemLocale>en-US</SystemLocale>
  <UserLocale>en-US</UserLocale>
</component>

If you prefer language settings other than US English, make sure that the language components are included in the installation media and refer to the correct locale IDs, which can be found on Microsoft MSDN (shortlink http://bit.ly/1gMNu2B).

Next, add amd64_Microsoft-Windows-Setup_neutral to Pass1 to configure some basic OS configurations such as Disk Layout. A generated sample XML part for a BIOS-based system is as follows:

<?xml version="1.0" encoding="UTF-8"?>
<component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" language="neutral" versionScope="nonSxS" publicKeyToken="31bf3856ad364e35" processorArchitecture="amd64" name="Microsoft-Windows-Setup">
  <DiskConfiguration>
    <Disk wcm:action="add">
      <CreatePartitions>
        <CreatePartition wcm:action="add">
          <Order>1</Order>
          <Size>350</Size>
          <Type>Primary</Type>
        </CreatePartition>
        <CreatePartition wcm:action="add">
          <Order>2</Order>
          <Extend>true</Extend>
          <Type>Primary</Type>
        </CreatePartition>
      </CreatePartitions>
      <ModifyPartitions>
        <ModifyPartition wcm:action="add">
          <Active>true</Active>
          <Format>NTFS</Format>
          <Label>Bitlocker</Label>
          <Order>1</Order>
          <PartitionID>1</PartitionID>
        </ModifyPartition>
        <ModifyPartition wcm:action="add">
          <Letter>C</Letter>
          <Label>HostOS</Label>
          <Order>2</Order>
          <PartitionID>2</PartitionID>
        </ModifyPartition>
      </ModifyPartitions>
      <DiskID>0</DiskID>
      <WillWipeDisk>true</WillWipeDisk>
    </Disk>
  </DiskConfiguration>
</component>

This configuration will make sure that there are clean partitions that follow Microsoft's default deployment model. The small partition at the start of the disk is created to support Bitlocker. Microsoft's full disk encryption can be used with Hyper-V hosts and can also be activated later. The use of Bitlocker is only recommended in high-security environments.

If your host does not have BIOS anymore and uses an UEFI-based setup routine, the XML file will be edited to include the following code as well:

<?xml version="1.0" encoding="UTF-8"?>
<component xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" language="neutral" versionScope="nonSxS" publicKeyToken="31bf3856ad364e35" processorArchitecture="amd64" name="Microsoft-Windows-Setup">
  <DiskConfiguration>
    <Disk wcm:action="add">
      <CreatePartitions>
        <CreatePartition wcm:action="add">
          <Order>2</Order>
          <Size>100</Size>
          <Type>EFI</Type>
        </CreatePartition>
        <CreatePartition wcm:action="add">
          <Order>3</Order>
          <Extend>false</Extend>
          <Type>MSR</Type>
          <Size>128</Size>
        </CreatePartition>
        <CreatePartition wcm:action="add">
          <Order>4</Order>
          <Extend>true</Extend>
          <Type>Primary</Type>
        </CreatePartition>
        <CreatePartition wcm:action="add">
          <Size>350</Size>
          <Type>Primary</Type>
          <Order>1</Order>
        </CreatePartition>
      </CreatePartitions>
      <ModifyPartitions>
        <ModifyPartition wcm:action="add">
          <Active>false</Active>
          <Format>NTFS</Format>
          <Label>Bitlocker</Label>
          <Order>1</Order>
          <PartitionID>1</PartitionID>
        </ModifyPartition>
        <ModifyPartition wcm:action="add">
          <Letter>C</Letter>
          <Label>HostOS</Label>
          <Order>3</Order>
          <PartitionID>3</PartitionID>
          <Format>NTFS</Format>
        </ModifyPartition>
        <ModifyPartition wcm:action="add">
          <Order>2</Order>
          <PartitionID>2</PartitionID>
          <Label>EFI</Label>
          <Format>FAT32</Format>
          <Active>false</Active>
        </ModifyPartition>
      </ModifyPartitions>
      <DiskID>0</DiskID>
      <WillWipeDisk>true</WillWipeDisk>
    </Disk>
  </DiskConfiguration>
</component>

Tech Concepts

Programming languages

Tech Tools

Unlimited access to the largest independent learning library in tech of over 8,000 expert-authored tech books and videos.

Innovative learning tools, including AI book assistants, code context explainers, and text-to-speech.

50+ new titles added per month and exclusive early access to books as they are being written.

Hyper-V Best Practices

By : Benedict Berger

Hyper-V Best Practices

By: Benedict Berger

Overview of this book

Adding basic components

Hyper-V Best Practices

By : Benedict Berger

Hyper-V Best Practices

By: Benedict Berger

Overview of this book

Adding basic components

Confirmation

Buy this book with your credits?

Submit Your Feedback

Create a Free Account To Continue Reading

Sign in to activate your 7-day free access