You have been engaged to design a virtualization solution for a financial organization. The solution you are proposing is using 10 GB Converged Network Adapters (CNA) to provide connectivity to the organization's network in three 1U rackmount servers. The organization needs to separate a Virtual Local Area Network (VLAN) that is currently configured to be delivered over the CNA onto a physically separate network to satisfy a new compliance requirement. A 1 GB network will provide sufficient bandwidth for this network, and the network should be highly available. Single points of failure should be minimized.

To support this compliance requirement, you, the architect, must take a holistic approach to the design by answering a number of questions about each design decision, as follows:

The impact can be fairly significant, depending on some of the answers. For example, let's say the 1U rackmount server will not support the required network adapters needed to satisfy the requirement and a different 2U rackmount server must be used. This then raises more questions, such as is there sufficient space in the rackmount to support the new server footprint.

What if the requirement had been that the applications connected to this network be virtualized on separate physical server hardware and storage? What parts of the design would have to change? The architect must be able to understand the dependencies of each part of the design and how a change in one place may affect other areas of the design.

As you think through these questions, you should be able to see how a change to a requirement can have a deep impact on many other areas of the design. It becomes very important to identify requirements early on in the design process.