Book Image

Practical Python Programming for IoT

By : Gary Smart
Book Image

Practical Python Programming for IoT

By: Gary Smart

Overview of this book

The age of connected devices is here, be it fitness bands or smart homes. It's now more important than ever to understand how hardware components interact with the internet to collect and analyze user data. The Internet of Things (IoT), combined with the popular open source language Python, can be used to build powerful and intelligent IoT systems with intuitive interfaces. This book consists of three parts, with the first focusing on the "Internet" component of IoT. You'll get to grips with end-to-end IoT app development to control an LED over the internet, before learning how to build RESTful APIs, WebSocket APIs, and MQTT services in Python. The second part delves into the fundamentals behind electronics and GPIO interfacing. As you progress to the last part, you'll focus on the "Things" aspect of IoT, where you will learn how to connect and control a range of electronic sensors and actuators using Python. You'll also explore a variety of topics, such as motor control, ultrasonic sensors, and temperature measurement. Finally, you'll get up to speed with advanced IoT programming techniques in Python, integrate with IoT visualization and automation platforms, and build a comprehensive IoT project. By the end of this book, you'll be well-versed with IoT development and have the knowledge you need to build sophisticated IoT systems using Python.
Table of Contents (20 chapters)
1
Section 1: Programming with Python and the Raspberry Pi
6
Section 2: Practical Electronics for Interacting with the Physical World
9
Section 3: IoT Playground - Practical Examples to Interact with the Physical World

Saying goodbye with a Will

Our final MQTT feature for exploration is known as a Will. A client (publisher or subscriber) can register a special Will message with the broker so that if the client dies and disconnects from the broker abruptly (for example, it loses its network connection or its batteries go flat), the broker on the clients' behalf will send out the Will message notifying subscribers of the device's demise.

Wills are just a message and topic combination similar to what we have been using previously. 

Let's see Wills in action, and for this, we're going to need three Terminals:

  1. Open a Terminal and start a subscriber with the following command:
# Terminal #1 (Subscriber with Will)
$ mosquitto_sub -h localhost -t 'pyiot' --will-topic 'pyiot' --will-payload 'Good Bye' --will-qos 2 --will-retain

The new options are as follows:

    • --will-payload: This is the Will message.
    • --will-topic: This is the topic the Will...