Book Image

M5Stack Electronic Blueprints

By : Don Wilcher
Book Image

M5Stack Electronic Blueprints

By: Don Wilcher

Overview of this book

As an embedded systems developer or an IoT developer, you can often face challenges in maintaining focus on prototyping a product concept while using a specific high-level programming language for implementation. To overcome these challenges, the M5Stack Core platform uses an ESP32 microcontroller and block code that allows you to focus on product creation and application instead of the high-level programming language. M5Stack Electronics Blueprints presents various design and prototyping approaches as well as UI layout and electronics interfacing techniques that will help you to become skilled in developing useful products effectively. This book takes you through a hands-on journey for a better understanding of the ESP32 microcontroller and the M5Stack Core's architecture. You’ll delve into M5Stack Core topics such as electronic units, light, sound, motion devices, interfacing circuits, SNAP circuit kits, Arduino applications, and building Bluetooth and Wi-Fi IoT devices. Further, you’ll explore various M5Stack core applications using a project-based learning method, including the fascinating 32-bit microcontroller device technology. By the end of this book, you’ll be able to design and build interactive, portable electronic controllers, IoT, and wearable devices using the M5Stack Core.
Table of Contents (14 chapters)
1
Part 1: M5Stack Electronics Hardware Architecture
5
Part 2: M5Stack Electronic Interfacing Circuit Projects
9
Part 3: M5Stack IoT Projects

Technical requirements

To engage with the chapter’s learning content, you will need the M5Stack Core2 to explore touchscreen controller applications and software coding of your UI designs. You will be introduced to an Arduino Uno projects board to allow ease in developing M5Stack Core2 touch control applications. Further, the UiFlow Blockly code software will be required to build and run the M5Stack Core2-Arduino Uno-compatible projects’ touch controller applications.

You will require the following:

  • M5Stack Core2
  • Freenove Projects board
  • One 4.7K ohm resistor
  • One 74HC00 or 74LS00 Quad NAND Gate IC
  • Three 10K ohm resistors
  • One 220-ohm resistor

Here is the GitHub repository for software resources:

https://github.com/PacktPublishing/M5Stack-Electronic-Blueprints/tree/main/Chapter06