Book Image

Architecting and Building High-Speed SoCs

By : Mounir Maaref
5 (1)
Book Image

Architecting and Building High-Speed SoCs

5 (1)
By: Mounir Maaref

Overview of this book

Modern and complex SoCs can adapt to many demanding system requirements by combining the processing power of ARM processors and the feature-rich Xilinx FPGAs. You’ll need to understand many protocols, use a variety of internal and external interfaces, pinpoint the bottlenecks, and define the architecture of an SoC in an FPGA to produce a superior solution in a timely and cost-efficient manner. This book adopts a practical approach to helping you master both the hardware and software design flows, understand key interconnects and interfaces, analyze the system performance and enhance it using the acceleration techniques, and finally build an RTOS-based software application for an advanced SoC design. You’ll start with an introduction to the FPGA SoCs technology fundamentals and their associated development design tools. Gradually, the book will guide you through building the SoC hardware and software, starting from the architecture definition to testing on a demo board or a virtual platform. The level of complexity evolves as the book progresses and covers advanced applications such as communications, security, and coherent hardware acceleration. By the end of this book, you'll have learned the concepts underlying FPGA SoCs’ advanced features and you’ll have constructed a high-speed SoC targeting a high-end FPGA from the ground up.
Table of Contents (20 chapters)
1
Part 1: Fundamentals and the Main Features of High-Speed SoC and FPGA Designs
7
Part 2: Implementing High-Speed SoC Designs in an FPGA
12
Part 3: Implementation and Integration of Advanced High-Speed FPGA SoCs

The SoC architecture exploration phase

This is the beginning of the pure technical stage in a project aiming to design an SoC. Usually, the technology to use isn’t specified at this stage, but there could be clear business reasons, as covered in Chapter 1, Introducing FPGA Devices and SoCs, that put the FPGA as the primary target technology for the SoC to design. These reasons can include (but are not limited to) the following:

  • The expected production volume is low.
  • The time to market and the product opportunity window are narrow.
  • The non-recurring engineering (NRE) cost of an FPGA technology is within the project’s budget.
  • In this project, using an ASIC has no competitive advantage. It only provides disadvantages and added project uncertainty and risks.

There could be many other reasons for making the FPGA the best target for the SoC to design, which will then benefit the time to market and flexibilities such a choice offers. At this stage...